Emergency Procedure
1. Hit the Emergency Stop Button
The (red) emergency stop button is located below the laser cutter’s control panel on the bottom right-hand side. Pushing this button will stop the laser from firing. This will not turn the machine off.
2. Ensure the Laser Lid is NOT Opened
Opening the lid of the laser may cause a fire to intensify as it feeds oxygen to fuel the fire.
3. Turn Extraction Off
If you need to turn the extraction OFF during an emergency, you must communicate with others who are laser cutting immediately and inform them that you will be turning the extraction off. Everyone must stop their laser cutting job whilst the extraction is off.
4. Immediately Inform Staff
If you cannot contain a fire or find workshop staff you must either;
Call 99032211 for Monash Security on your personal device or the phone located in the laser area
Call 000
Exit the workshop immediately.
Last updated